CSE 370 FPGA In-Out Pins

In-Out Pins on FPGA

The In-Out Pins you see running along the bottom of your board are directly connected to your FPGA. You can read more about these pins on Altera's website here: DE1 Specifications. You probably remember hooking Switches, Keys, and LEDs up to these In-Out Ports. This is because your FPGA came pre-loaded with a program that directed the Switches, Keys, and LEDs to these ports. However, now that you are programming the FPGA yourself, the In-Out Ports are no longer mapped which means you can map them however you like with your .qsf file. Below is a table which describes the In-Out Port Pin, and the functionality of the In-Out Port based on the pre-loaded FPGA program. You can use this table as a guide when writing your .qsf file. As always, you can also use the pinouts.html page as a guide for accessing the Switches, Keys, and LEDs. The table below is in order from the right side of the board to the left. The first half 18 PINS on the left side of the table, and the second half of the 18 PINs on the right side of the table.


The In-Out Pins

PinIntial Function Pin Intial Function
PIN_L18LEDG0 PIN_C22 None
PIN_L19LEDG1 PIN_C21 None
PIN_K20LEDG2 PIN_B20 None
PIN_J18LEDG3 PIN_A20 None
PIN_J20LEDG4 PIN_B19 KEY0
PIN_J19LEDG5 PIN_A19 KEY1
PIN_K22LEDG6 PIN_B18 KEY2
PIN_K21LEDG7 PIN_B18 KEY3
PIN_J22LEDR0 PIN_B17 SW0
PIN_J21LEDR1 PIN_A17 SW1
PIN_G22LEDR2 PIN_B16 SW2
PIN_G21LEDR3 PIN_A16 SW3
PIN_F22LEDR4 PIN_B15 SW4
PIN_F21LEDR5 PIN_A15 SW5
PIN_E22LEDR6 PIN_B14 SW6
PIN_E21LEDR7 PIN_A14 SW7
PIN_D22LEDR8 PIN_B13 SW8
PIN_D21LEDR9 PIN_A13 SW9
Comments to: cse370- webmaster@cs.washington.edu