Quick & Dirty Guide to Getting Started in CSE 341
We'll use Reflection X to give you a graphical interface for your Unix session
on Attu (attu.cs.washington.edu).
Logging in from the basement labs
If you're going use the labs, everything is set up for you:
- Linux machines: Click on Applications->System Tools->Terminal, and skip down to the Basic Unix commands section.
- Windows machines: Simply double-click the "SSH-X attu" icon on the desktop. Type in your CSE
account password and you're all set. Now type "xterm &"
without the quotation marks to get an xterm. Skip the next
We recommend you work in the basement labs where we have checked that
the right software is already installed and the directions we provide are
correct. If you still want to work elsewhere you have a few options:
- Install Reflection-X on your computer, using the CSE
department instructions. What a Reflection-X session does is
connect you to a CSE UNIX server. Everything you type or click is
sent to the server, which sends back to your computer what to display.
So you're using the department's software installation.
- Install the necessary software (emacs and sml (and possibly
sml-mode for emacs) at first, DrScheme
later, Ruby after that) on your computer. The links on
the course web page should help. Make sure you get the right
- For those savvy with terminals and ssh, it is possible to run
emacs and sml directly in terminals after connecting via ssh to the
department, but it is not particularly pleasant.
- You can change your desire to avoid the department labs.
Basic Unix commands
To move around through the directory structure in your xterm window, you'll need to know a few basic Unix commands.
attu4% mkdir mydir
attu4% cd mydir
In the above (the things within the quotation marks are commands to type, don't type the quotation marks themselves):
To make a directory, and name it, say "mydir", you would type "mkdir mydir".
"ls" lists what you have in your current directory.
"cd" will change directories. To change to a directory "mydir", for example, type "cd mydir". To move back out of a directory, type "cd ..", and to get back to your home directory, "cd ~".
To check where you are, type "pwd".
To get help on some command, say you want to know how to use "ls", type "man ls" and you will get the manual pages for that command. (Alternatively, you can use "info" in the same way.)
These are just the very minimum basics, but you won't need too much
more in 341. For more info on UNIX, see your ACM chapter's tutorials,
tutorial, material from the first week of CSE303,
or many other good resources.
Accessing your UNIX home directories from Windows XP
If you're in the basement labs, your O: drive should already be mapped to your Unix home directory. Look under for the O: drive under "My Computer" in the Start Menu. To accesss your files, go to O:\unix\homes\iws\userid, replacing "userid" with your own CSE account username. All the files you saved while working on Attu should be there.
If you're in the labs and your O: drive isn't mapped, open up a Windows Explorer window (by clicking the "My Computer" from the Start Menu) and in the Tools menu item, select "Map Network Drive" and enter O: for drive and \\ntdfs\cs for folder. Click Finish. If you're at a computer that does not use CSE's name servers, for example in Mary Gates Hall or at home, you will need to use the fully qualified name, \\ntdfs.cs.washington.edu\cs.
For more info on this, see the CSE support page that discusses Microsoft DFS, which is what we just used.
Now that you have your xterm open, let's open Emacs.
Type "emacs &" to open emacs in a new window. Note what happens if you don't type the "&"--you can't do anything in your xterm window. The "&" runs your program, in this case, emacs, in the background.
- The cursor is a rectangular block and is referred to as the
- The modeline displays information about the
buffer displayed in the current window. A buffer
is a logical "thing" that you are working on. When you open a
file, it will be loaded into a buffer, typically with the same
name as the file.
- Every buffer is edited in a mode. The most basic
mode is Fundamental, which provides only the most basic
Emacs editing features. There are modes for many different
- There are many "special" buffers that do not correspond to
loaded files. The one above is called *scratch*. This
buffer runs in Lisp Interaction mode, which means that
you can interactively type and evaluate expressions in the Lisp
Emacs uses many key combinations involving the Control
and Meta keys. Such key combinations are denoted
C-x (Control-x (lowercase)) or M-x (Meta-x). On
keyboards that don't have Meta, Alt is usually an
acceptable substitute. If Alt doesn't work, ESC-x is equivalent
A sequence of key presses is written like C-a C-b M-x,
which would mean do the three actions in sequence.
The most important keys in Emacs
C-x C-c: Quits Emacs.
C-g: Cancels the current action.
C-x C-f: Opens a file.
C-x C-s: Saves a file.
C-x C-w: "Save as" (save contents to file
with a name you type).
Some other useful keys:
C-x 2: Split the window into 2 buffers, one above the
other. (Use the mouse or C-x o to switch between them.
C-x 0: Undo window-splitting so there is only 1 buffer.
C-x b: Switch to another buffer by entering its name.
C-x C-b: See a list of all current buffers.
Getting help within Emacs: In addition to the help button on the right...
C-h: Help. Hitting this will display a short message in
the minibuffer: C-h (Type ? for further
C-h t: Built-in interactive tutorial. Some people don't
like this tutorial, but some people find it helpful.
C-h b: Key bindings. This lists all key bindings
that are valid for the current mode. Note that key bindings
change from mode to mode!
C-h a: Command apropos. After hitting C-h
a you can type a symbol and a window will appear that lists
all symbols and functions that match that phrase.
Once set up, it is more convenient to run SML/NJ in Emacs, but you
can also run it directly from the terminal command prompt.
Just type "sml" at your terminal command prompt. To get out of SML/NJ, type C-d.
To run it from Windows in the labs, you can find SML/NJ (Standard ML of New Jersey) in Programs under the Start Menu.
To load a .sml file into SML, type "use "filename.sml";" while within SML/NJ.
SML/NJ in Emacs
Remember the Emacs modes we were talking about earlier? You can run
emacs in SML mode, but you'll have to set up a few things first.
If you're using UNIX from the CSE labs:
That's it. To check if it works, you need to restart Emacs. Save your
file (C-x C-s) and quit Emacs (C-x C-c), and open it up again. Open
any file with a .sml extension (type "C-x C-f" and then "test.sml").
If your mode line says "(SML)", you're set!
If you are not in the basement labs, you need to do the following:
- Download SML
mode and install it yourself in some directory.
- Use the above lines in your .emacs file, but change the
first line to:
(setq load-path (cons "YOUR PATH HERE" load-path))
There are multiple ways to run SML/NJ from within Emacs
- Follow these notes.
- Open an SML file (like first.sml from the
previous page), and then hit C-c C-l. If your sml-mode
is properly configured, you will be prompted for the SML
executable and the file to load, and a buffer labeled
*sml* should pop up with the current file loaded:
Save an SML/NJ transcript
You may want to save output of an entire SML/NJ
session. Here are a few ways.
Method 1: Saving within Emacs
If you use the method described above for running SML/NJ under
Emacs, you can save the *sml* buffer the same way you save
any other buffer: switch to the buffer's window and hit C-x
C-s. You will be prompted for a filename. You can save as
many times as you wish.
Method 2: Copy and paste
In the X Window System, the idiom for "copy and paste" is to
select a region, and then click the middle mouse button (the mouse
wheel on an MS mouse suffices) at the spot you want to
paste the selected region:
Method 3: if you are in SML/NJ for Windows
Right-clicking within the window should bring up options for selecting all, copy/pasting, etc.
Finally, there are other resources, including the (older but not
necessarily outdated) course
help pages as well as the CS Lab and Support
Acknowledgment: These notes have evolved over the last few years, but
are largely based on notes written by Keunwoo Lee in 2001. Last
updated by Dan Grossman for Spring 2008.