FIT 100, Autumn 2004 - Lab 0 - UW Network Resources

Objectives

This is a first lab assignment for the course Fluency with Information Technology: FIT 100 (aka: CSE 100, INFO 100). This lab is especially important if you are new to the UW system and have not used the computer resources provided by the university before. Even if you have used computers at the UW in previous quarters, we suggest that you work through the tasks given here to make sure you are familiar with what is available. For the the rest of this course, we will assume that you have the skills covered in this assignment.

This lab will not be graded and you do not need to submit anything when you have completed this assignment.

Activate Your Student Web Publishing Area

By activating your Student Web Publishing area, you will be able to publish web pages through your UW computer account.

You should already have a UW NetID, since you needed it to register for FIT 100. Your UW NetID is used to identify you when you access information on the UW web pages and when you wish to activate other UW network resources. You can read more about the UW NetID at http://www.washington.edu/computing/uwnetid/.

  1. Start a web browser such as Mozilla, Netscape, or Internet Explorer. Go to MyUW (http://myuw.washington.edu) and login with your UW NetID. Look around your UW Main Page to become familiar with it.
  2. Look for the text Manage Your UW NetID Resources. If you have trouble finding it, use the find function in your web browser. This text acts as a hyperlink, which can take you to a particular web page, image or other file on the web. Click on the link so that you go to the Manage Your UW NetID Resources web page.
  3. On this page, you can see information about your UW NetID, UW Email account, home page URL (if activated), and disk usage.
  4. On the menu to the left, you will find the text Add or Change Services. Click on it.
  5. On this new page, make sure that all of your Basic Services are activated by checking each box with the Basic Services phrase next to it. Also make sure to activate Student Web Publishing if it is displayed under Services that are off. Click on the Continue button when you are done.
  6. You should now be shown the URL of your home page.
    http://students.washington.edu/yourUWNetID/

    For example, if your UW NetID was smith, the URL for your home page would be:
    http://students.washington.edu/smith/

  7. Check that your home page exists by entering the URL in your web browser's address field (located at the top of the window). Your web page will probably look similar to this:

    automatically created home page

For additional information about creating and publishing web pages, read the Creating and Publishing Web Pages document created by Computing and Communications (C&C): http://www.washington.edu/computing/web/publishing/.

Read Email with WebPine

You can access your UW email through a web browser using WebPine. WebPine was developed as a graphical interface for Pine, which is discussed in the following section.

  1. If you do not already have one running, start a web browser such as Mozilla, Netscape, or Internet Explorer.
  2. You can either go to WebPine from MyUW (http://myuw.washington.edu/) or by going directly to http://webpine.washington.edu/. You will need to enter your UW NetID and password.
  3. Click on the Open inbox Now button.
  4. Compose an email.
    On the menu to your left, you will find Compose. Use Compose when you wish to to write an email to someone. For now, write an email to yourself.
    1. Click on the Compose link.
    2. Enter the entire email address of who you wish to send your email to. In this case, it should be your UW NetID followed by @u.washington.edu, e.g., smith@u.washington.edu.
    3. Enter a subject, for example, test email.
    4. Write something in the body.
    5. On the menu to the left, you will see three actions: send, postpone, and cancel. Click on the circle beside Send and then click on the OK button. You have now sent an email to yourself.
    6. After a few seconds, your email should arrive in your inbox or, if you forward your email to another account, in that account's inbox. To check for new messages in your UW inbox with WebPine, click on the word INBOX on the menu to your left. The contents of your inbox will then become updated.
    7. Sometimes it can take a long time for email to be sent so if you do not see your email right away, check again later.
  5. Read email.
    You read email by clicking on its subject. The subject should be a blue, underlined link.
  6. Create a folder/directory.
    You can create folders and directories to help organize your email.
    1. On the menu to your left, you will find Folder List. Click on the link to view all of your folders/directories in WebPine.
    2. Beside Deskmail Folders, you will see a Create New… button. Click on the button to create a new folder.
    3. On the following page, you will be given the option to either create a new folder or directory. Read the description for each to learn the difference between the two.
    4. For this lab, you will create a new folder. Give your new folder a name, for example, personal. Click on the Create New Folder button to create the folder.
    5. You should have automatically returned to your Folder List page and should see your newly created folder in the list.
    6. Return to your inbox by clicking on INBOX in the menu to your left.
  7. Move email to a folder/directory.
    Move email from your inbox to appropriate folders/directories to help organize your email.

    For this lab, you will move the email you mailed to yourself to the newly created folder. Click on the little box to the left of the email you mailed to yourself. If you forwarded your email to another email address, then you will not have any email to move into a folder and will either need to turn off mail forwarding to do the following steps, or skip them.

    1. At the top right, you will see a boxed off area named Save Messages. Inside of this box, there are two buttons: Save and Browse. To select a folder to save your email in, click on the Browse button and select the appropriate folder, e.g., personal. Alternatively, you can write the name of the folder in the box. (Your email has not been saved to the folder yet.)
    2. To save your email in the personal folder, click on the Save button. When you have done this, the subject of your email will be crossed over. You will also see a D on the left side of the date for your email. This means that the email is marked to be deleted but has not been erased yet.
    3. To check that your email is in your personal folder, click on Folder List on the menu to your left, and then click on personal in the list of folders/directories. You should now see your email.
    4. To erase the email from your inbox, go back to your inbox, make sure the box to the left of your email is checked, and click on the Expuge button on the top right of the page. The email should now disappear from your inbox and should only be located in the personal folder.

      Note: Email that has been deleted will be crossed out but not actually erased. To erase the email, you must expunge it.

WebPine has several other functions that you can explore on your own. Please check the WebPine FAQ (frequently asked questions) first if you have questions about WebPine: http://www.washington.edu/computing/faqs/webpine.html

Read Email with Pine

You can also access your UW email using a shell and Pine, which can be especially helpful when you do not have access to a web browser or prefer to not use the mouse. Pine is a popular email client used by students and professionals world wide.

Pine and WebPine were both created by the Department of Computing and Communications (C&C) at the UW. WebPine has most but not all of the features available in Pine. Since Pine does not use a web interface, it is much quicker than WebPine.

  1. Open a shell.
    Similar to a web browser, a shell allows you to interact with computers. But instead of using a mouse to click on links, you must type commands when you use a shell.
    1. Start SSH (SSH Secure Shell) or SFTP (SSH Secure File Transfer). These programs will be discussed in more detail later.
      SSH icon SFTP icon
      SSH SFTP
    2. Click on the Quick Connect button.

    3. A window named Connect to Remote Host will pop up. For the host name, enter dante.u.washington.edu and for the user name, enter your UW NetID. If your UW NetID was smith, you would enter the following:

      SSH connect dialog

      Enter your password in the next pop-up window to finish connecting to dante.

    4. If you connected using SFTP, you will see a divided window showing some files and/or directories. You need to open a shell by clicking on its icon.

      SFTP window

    5. If you connected using SSH or opened a shell, then you will see the following menu.

      Welcome to Dante menu

      Note: If your SSH window is narrower than 78 columns wide, text may not display properly. Increase the window width to at least 78 or 80 columns by dragging on the lower right corner of the window. A typical normal window size is 80x25. You see the size of your window on the right side of the status bar, which is located on the bottom of the SSH window.

  2. Start Pine.
    Type the letter E to start Pine. You do not need to press the enter key. After starting Pine, you should see the following menu.

    Pine menu

  3. At all times, you will see a menu at the bottom of the window showing a highlighted letter followed by the command it corresponds to. You activate the command by pressing its one letter key. In the above example, pressing the ? would bring up a help menu. If you see a ^ before a letter, this means to press down the CTRL key and the letter at the same time.
  4. You compose an email by pressing C (Compose Message).

    Note: When using Pine, It is not necessary to add the @u.washington.edu to send email to anyone with an email address ending with @u.washington.edu. Pine is configured to automatically complete email addresses that do not end with an @-sign. An incomplete email address will be looked up in the UW Directory and, if there are several people with that name, you can choose the correct email address.

  5. You reach your inbox by pressing I (Message Index). Once in your inbox, you can move up and down with the arrow keys and read an email by pressing the enter key.
  6. You can go to different folders/directories by pressing L (Folder List). You can also create and delete folders/directories in the Folder List area. If you press L and then select Mail on yourUWNetID.deskmail.washington.edu by pressing enter, you should see the personal folder that you created when you used WebPine. You navigate through your folders/directories with the arrow keys and select a folder/directory with the enter key.
  7. You quit Pine by pressing Q (Quit). If Pine asks you to confirm, press Y for yes.
  8. To quit the shell, press L (logout).
  9. Don't forget to close all SSH windows to ensure that you have logged out everywhere.

For detailed information about how to use Pine, read the Getting Started With Email Using Pine document created by C&C: http://www.washington.edu/computing/email/pinedoc/.

Check List

______My UW student web publishing area is activated.
______My UW email account is activated.
______I know the URL of my home page.
______I know how to use Webpine to read email.
______I know how to use Pine to read email.

Help & Resources

The University of Washington Department of Computing and Communication (C&C) has created a series of help pages for the various network services available to you.