CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: Warning L-1/C0 : #0 Warning: The net '/CrossHairs/blankOut' is a feed through net. (FPGA-CHECK-9) CM: 0 error(s) 1 warning(s) found CM: Warning L-1/C0 : #0 Warning: The net '/CrossHairs/blankOut' is a feed through net. (FPGA-CHECK-9) CM: 0 error(s) 1 warning(s) found CM: 0 error(s) 0 warning(s) found CM: Warning L-1/C0 : #0 Warning: The net '/CrossHairs/blankOut' is a feed through net. (FPGA-CHECK-9) CM: 0 error(s) 1 warning(s) found CM: Warning L-1/C0 : #0 Warning: The net '/CrossHairs/blankOut' is a feed through net. (FPGA-CHECK-9) CM: 0 error(s) 1 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: Warning L-1/C0 : #0 Warning: The net '/CrossHairs/blankOut' is a feed through net. (FPGA-CHECK-9) CM: 0 error(s) 1 warning(s) found CM: 0 error(s) 0 warning(s) found CM: Warning L-1/C0 : #0 Warning: The net '/CrossHairs/blankOut' is a feed through net. (FPGA-CHECK-9) CM: 0 error(s) 1 warning(s) found CM: 0 error(s) 0 warning(s) found CM: Warning L-1/C0 : #0 Warning: The net '/CrossHairs/blankOut' is a feed through net. (FPGA-CHECK-9) CM: 0 error(s) 1 warning(s) found CM: 0 error(s) 0 warning(s) found CM: Warning L29/C0 : #0 Warning: Variable 'CameraBank' is being read in routine LaserSpot line 29 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L29/C0 : #0 Warning: Variable 'RowAddr' is being read in routine LaserSpot line 29 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L29/C0 : #0 Warning: Variable 'PixelData' is being read in routine LaserSpot line 29 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L29/C0 : #0 Warning: Variable 'ColAddr' is being read in routine LaserSpot line 29 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L112/C0 : #0 Warning: Variable 'MonitorBank' is being read in routine LaserSpot line 112 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L112/C0 : #0 Warning: Variable 'Row0' is being read in routine LaserSpot line 112 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L112/C0 : #0 Warning: Variable 'Col0' is being read in routine LaserSpot line 112 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L112/C0 : #0 Warning: Variable 'Col1' is being read in routine LaserSpot line 112 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L112/C0 : #0 Warning: Variable 'Row2' is being read in routine LaserSpot line 112 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L112/C0 : #0 Warning: Variable 'Col3' is being read in routine LaserSpot line 112 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L112/C0 : #0 Warning: Variable 'Row3' is being read in routine LaserSpot line 112 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L112/C0 : #0 Warning: Variable 'Row1' is being read in routine LaserSpot line 112 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L112/C0 : #0 Warning: Variable 'Col2' is being read in routine LaserSpot line 112 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L-1/C0 : #0 Warning: Latch inferred in design 'LaserSpot' read with 'hdlin_check_no_latch'. (HDL-307) CM: 0 error(s) 14 warning(s) found CM: Warning L31/C0 : #0 Warning: Variable 'CameraBank' is being read in routine LaserSpot line 31 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L31/C0 : #0 Warning: Variable 'CameraFrame' is being read in routine LaserSpot line 31 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L31/C0 : #0 Warning: Variable 'PixelData' is being read in routine LaserSpot line 31 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L31/C0 : #0 Warning: Variable 'ColAddr' is being read in routine LaserSpot line 31 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L31/C0 : #0 Warning: Variable 'RowAddr' is being read in routine LaserSpot line 31 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L118/C0 : #0 Warning: Variable 'MonitorBank' is being read in routine LaserSpot line 118 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L118/C0 : #0 Warning: Variable 'Row0' is being read in routine LaserSpot line 118 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L118/C0 : #0 Warning: Variable 'Row1' is being read in routine LaserSpot line 118 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L118/C0 : #0 Warning: Variable 'Col0' is being read in routine LaserSpot line 118 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L118/C0 : #0 Warning: Variable 'Row2' is being read in routine LaserSpot line 118 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L118/C0 : #0 Warning: Variable 'Row3' is being read in routine LaserSpot line 118 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L118/C0 : #0 Warning: Variable 'Col3' is being read in routine LaserSpot line 118 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L118/C0 : #0 Warning: Variable 'Col1' is being read in routine LaserSpot line 118 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L118/C0 : #0 Warning: Variable 'Col2' is being read in routine LaserSpot line 118 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L-1/C0 : #0 Warning: Latch inferred in design 'LaserSpot' read with 'hdlin_check_no_latch'. (HDL-307) CM: 0 error(s) 15 warning(s) found CM: Warning L31/C0 : #0 Warning: Variable 'CameraBank' is being read in routine LaserSpot line 31 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L31/C0 : #0 Warning: Variable 'CameraFrame' is being read in routine LaserSpot line 31 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L31/C0 : #0 Warning: Variable 'PixelData' is being read in routine LaserSpot line 31 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L31/C0 : #0 Warning: Variable 'RowAddr' is being read in routine LaserSpot line 31 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L31/C0 : #0 Warning: Variable 'ColAddr' is being read in routine LaserSpot line 31 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L118/C0 : #0 Warning: Variable 'MonitorBank' is being read in routine LaserSpot line 118 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L-1/C0 : #0 Warning: Latch inferred in design 'LaserSpot' read with 'hdlin_check_no_latch'. (HDL-307) CM: 0 error(s) 7 warning(s) found CM: Warning L31/C0 : #0 Warning: Variable 'CameraBank' is being read in routine LaserSpot line 31 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L31/C0 : #0 Warning: Variable 'CameraFrame' is being read in routine LaserSpot line 31 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L31/C0 : #0 Warning: Variable 'PixelData' is being read in routine LaserSpot line 31 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L31/C0 : #0 Warning: Variable 'RowAddr' is being read in routine LaserSpot line 31 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L31/C0 : #0 Warning: Variable 'ColAddr' is being read in routine LaserSpot line 31 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L118/C0 : #0 Warning: Variable 'MonitorBank' is being read in routine LaserSpot line 118 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L-1/C0 : #0 Warning: Latch inferred in design 'LaserSpot' read with 'hdlin_check_no_latch'. (HDL-307) CM: 0 error(s) 7 warning(s) found CM: Warning L29/C0 : #0 Warning: Variable 'CameraBank' is being read in routine LaserSpot line 29 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L29/C0 : #0 Warning: Variable 'CameraFrame' is being read in routine LaserSpot line 29 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L29/C0 : #0 Warning: Variable 'PixelData' is being read in routine LaserSpot line 29 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L29/C0 : #0 Warning: Variable 'RowAddr' is being read in routine LaserSpot line 29 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L29/C0 : #0 Warning: Variable 'ColAddr' is being read in routine LaserSpot line 29 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L116/C0 : #0 Warning: Variable 'MonitorBank' is being read in routine LaserSpot line 116 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L116/C0 : #0 Warning: Variable 'Row3' is being read in routine LaserSpot line 116 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L116/C0 : #0 Warning: Variable 'Col3' is being read in routine LaserSpot line 116 in file 'D:/Cam/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L-1/C0 : #0 Warning: Latch inferred in design 'LaserSpot' read with 'hdlin_check_no_latch'. (HDL-307) CM: 0 error(s) 9 warning(s) found CM: Warning L-1/C0 : #0 Warning: The net '/CrossHairs/blankOut' is a feed through net. (FPGA-CHECK-9) CM: 0 error(s) 1 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: Warning L29/C0 : #0 Warning: Variable 'CameraFrame' is being read in routine LaserSpot line 29 in file 'D:/CamNew/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L117/C0 : #0 Warning: Variable 'Col1' is being read in routine LaserSpot line 117 in file 'D:/CamNew/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L117/C0 : #0 Warning: Variable 'Col2' is being read in routine LaserSpot line 117 in file 'D:/CamNew/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L117/C0 : #0 Warning: Variable 'Col3' is being read in routine LaserSpot line 117 in file 'D:/CamNew/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L117/C0 : #0 Warning: Variable 'Row3' is being read in routine LaserSpot line 117 in file 'D:/CamNew/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L117/C0 : #0 Warning: Variable 'Row0' is being read in routine LaserSpot line 117 in file 'D:/CamNew/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L117/C0 : #0 Warning: Variable 'Row2' is being read in routine LaserSpot line 117 in file 'D:/CamNew/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L117/C0 : #0 Warning: Variable 'Col0' is being read in routine LaserSpot line 117 in file 'D:/CamNew/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L117/C0 : #0 Warning: Variable 'Row1' is being read in routine LaserSpot line 117 in file 'D:/CamNew/VGACAM/LaserSpot.v', but does not occur in the timing control of the block which begins there. (HDL-180) CM: Warning L-1/C0 : #0 Warning: Latch inferred in design 'LaserSpot' read with 'hdlin_check_no_latch'. (HDL-307) CM: 0 error(s) 10 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found CM: 0 error(s) 0 warning(s) found